The shape and position size of the geometric elements forming the outline of the parts (such as the position of the line, the radius of the circle arc, the arc tangent with the line, etc.) are the important basis for CNC programming. When manual programming, the coordinate value of each node shou...
Analysis of the use of hydraulic cutting machine?
The characteristic of the hydraulic cutting machine is that when the cutting head is applied on the processed material through the knife mold, the pressure in the acting cylinder does not reach the rated pressure, the pressure will increase with t...
Equipped with two brackets. Open the cover plate between the machine with a hexagonal shear and use anti-wear hydraulic oil. After the machine is energized, (three fire wires and one ground wire) are on, turn on the power switch and the oil pump working switch, and then immediately turn off the p...
It adopts double balance rod, double cylinder, four columns, automatic balance, automatic lubrication, automatic and full oil pressure design
Simple operation, safe, power saving, strong cutting force, smooth force, convenient maintenance.
The English name of the cutting machine is Cutter Maching...
Automatic cutting machine is also an automatic feeding cutting machine. The four-column and double-cylinder structure is adopted to realize large tonnage cutting and save energy. On the basis of the automatic cutting machine, the single or double-sided automatic feeding device is added, which imp...
Automatic cutting machine is also an automatic feeding cutting machine. The four-column and double-cylinder structure is adopted to realize large tonnage cutting and save energy. On the basis of the automatic cutting machine, the single or double-sided automatic feeding device is added, which imp...
Automatic cutting machine parts with good structure technology refers to the certain production conditions, can be easily, economic production, and easy to assemble into the machine this characteristic. Therefore, it is necessary to consider the structure technology of the parts from the producti...
For the low speed crawling caused by the uneven friction of the guide element in the hydraulic cylinder of the automatic cutting machine, it is recommended to use metal as the guide support. The coefficient should be small, for the thickness of the support ring, the size tolerance and thickness u...
Four column cutter column oil leakage is a common oil leakage problem, hydraulic oil through the column up and down the movement belt, if the column has oil and in the oil tank, did not overflow to the workbench, such a phenomenon is a normal phenomenon, does not need to deal with. If the hydraul...
For the hydraulic cutting machine or some of it will be some unfamiliar, because the hydraulic cutting machine really has a lot of nicknames, such as cutting bed, press, cutting machine, die cutting machine and Hong Kong called beer machine and so on. So for hydraulic cutting machine really rusty...
Maintenance method of cutting press machine:
1. The hydraulic oil should be replaced for 3 months after the first use of the machine. The hydraulic oil should be replaced, and the oil filter network should be cleaned or replaced. The damage of the valve pump caused by the replacement does not bel...
The use of the cutting machine must need to connect the power supply after the boot can, switch the machine every day, then the use frequency of the switch is also very high, such a high frequency of operation will inevitably lead to some problems due to various reasons, such as aging failure and...