1. When the machine stops working for more than 24 hours, relax the fixed mode of the hand wheel to avoid damage to other parts;
2, it is to keep enough space around to provide conditions for mechanical placement, to provide enough inspection space for machine maintenance;
3. If the abnormal sound is heard when starting up, stop the power supply detection immediately;
4. Please keep in touch with the company’s professional master at any time to report the specific situation of the referee machine to the technical personnel.
5. In order to avoid the danger of electric shock of the cutting machine, the grounding terminal must be reliably grounded when used. Pay attention to keep the hands dry, and the relevant professionals to operate;
6. Before pressing the machine, the press plate should completely cover the knife mold. Prevent workers from approaching the transverse domain of the machine. Turn off the regulating motor when leaving the machine;
7. The hydraulic oil in the fuel tank should be replaced once after a quarter of use, especially the oil used for the new machine. The new machine installation or oil change after about 1 month of use, must clean the oil net. And the replacement of hydraulic oil must clean the oil tank;
8. When the machine starts, the problem of controlling oil can be controlled within a certain range. If the temperature of oil is too low, the work of the oil pump should continue to a certain period of time, and the oil temperature can reach 10℃.
Post time: Sep-22-2024