In fact, now many cutting machines can do their own lubrication, so the user just need to carry out some relatively simple cleaning work can be, such as: the work surface cleaning and the machine surrounding edge material cleaning.
The daily maintenance of the cutting machine shall be handled by the operator. The operator shall be familiar with the equipment structure and follow the operation and maintenance procedures.
1. Check the main part of the machine before the work starts (change the shift or interrupt the work), and fill with lubricating oil.
2. Use the equipment in the shift in strict accordance with the equipment operation procedures, pay attention to the operating status of the equipment, and deal with or report any problems found in time.
3, before the end of each shift, a cleaning work should be carried out, and the friction surface and bright surface coated with lubricating oil.
4. When the machine works in normal two shifts, the machine shall be cleaned and checked once every two weeks.
5. If the machine wants to be used for a long time, all the bright surface must be wiped clean and coated with anti-rust oil, and cover the whole machine with a plastic cover.
6. Improper tools and unreasonable tapping methods shall not be used when dismantling the machine.
Post time: Mar-09-2024