Automatic cutting press machine is a kind of efficient cutting equipment, commonly used in textile, leather, plastic and other industries. The use of fully automatic cutting machine needs to pay attention to the following aspects: 1, safe operation. When using the fully automatic cutting machine, it should follow the operating procedures. Operators should wear work clothes that meet safety requirements and wear protective equipment such as gloves, goggles, etc. Never, hand or other body parts near the cutting parts during operation to avoid accidental injury.
2. Machine maintenance. The automatic cutting machine requires regular maintenance, including cleaning and lubrication of the cutter, cutting bed, pressure plate and other components. Check the wiring of electrical equipment regularly to ensure the normal operation of electrical components. Maintenance work shall be carried out by professional personnel, do not repair or modify the machine without authorization.
3. Set the parameters reasonably. Before using the fully automatic cutting machine, the parameters of the machine should be set reasonably according to the nature and requirements of the cutting material. Including cutting speed, cutting strength, tool pressure, cutting Angle, etc. Different materials require different parameter settings, adjusted to ensure cutting and production efficiency.
4. Place the material correctly. When using the fully automatic cutting machine, pay attention to the correct placement of the cutting material. Place the materials flat on the cutting bed and ensure that the material is parallel to the cutter. During the cutting process, the position of the material should be adjusted timely to keep the cutting line accurate.
5. Monitor the cutting quality. When using automatic cutting machine, monitor the cutting quality in time. Check whether the cutting line is accurate and whether the cutting edge is neat, etc. If there is any problem with the quality of cutting, adjust the machine parameters or replace the tool timely, and conduct sample testing to ensure that the cutting quality meets the requirements.
6. Safe electricity use. The automatic cutter needs to be connected to the power supply for work, so pay attention to safe electricity use. Select power sockets and wires that comply with national standards to ensure that the grounding wire of electrical equipment is well connected. In the process of use, check whether the power line is normal in time to avoid leakage or short circuit.
Seven, regular cleaning. The automatic cutter will produce some dust and impurities during the use process, so it needs to be cleaned regularly. When cleaning, cut off the power supply first, and then wipe the machine surface and working area with a clean soft cloth. Be careful not to contact the machine with water or chemical detergent in case of short circuit or damage.
VIII. Temperature management. The automatic cutter will produce a certain amount of heat during use, so the temperature of the machine. In the process of use, check the heat dissipation equipment of the machine regularly to maintain good ventilation. If the machine is found to be overheating, it should be stopped in time to continue to work after troubleshooting, so as not to affect the cutting quality and machine life.
Automatic cutter is an efficient equipment which can improve production efficiency and cutting quality. But at the same time, we should also pay attention to the problems of safe operation, machine maintenance, reasonable setting of parameters, correct placement of materials, monitoring of cutting quality, safe electricity use, regular cleaning and temperature management. Only by doing these, can we better play the role of automatic cutting machine to ensure the smooth production.
Post time: Mar-31-2024