What are the use methods and maintenance points of the cutting press machine?

1. Use method of the cutting press machine:
Preliminary preparation: first of all, check whether all the parts of the cutting machine are in good condition, without loosening phenomenon. Check whether the power cord is firmly connected and determine whether the power supply is normal. At the same time, the position of the cutting machine should be kept flat to ensure the stability during the operation.
Material preparation: organize the materials to be cut to ensure smooth and wrinkle free. Adjust the cutting size of the cutter according to the size of the material.
Adjust the tool: Select the appropriate tool as needed and install it on the cutting machine. By adjusting the height and angle of the tool to parallel the material contact surface.
Procedure: Press the start button of the cutter to start the tool. Place the material flat in the cutting area and fix it to avoid moving during the cutting process. Then, the lever is gently pressed to make the tool start cutting.
Inspection result: after the cutting, check whether the cutting part is smooth and smooth. If multiple cuts are required, this can be repeated.
2. Maintenance key points of the cutting machine:
Cleaning and maintenance: clean all parts of the cutting machine regularly to avoid the accumulation of dust and debris. Use a soft cloth or brush to clean the internal and external surfaces of the machine. Be careful not to use acidic or alkaline detergent to avoid corrosion to the machine.
Tool maintenance: regular maintenance and replacement of tools, to avoid the old tools or serious wear, affect the cutting effect. In the process of use, attention should be paid to avoid the collision between the tool and hard objects, to avoid the tool damage.
Adjustment and calibration: regularly check whether the cutting size of the cutting machine is accurate, and adjust it in case of deviation. At the same time, it is also necessary to check whether the height and Angle of the tool is correct, to avoid uneven cutting.
Lubrication maintenance: lubrication the transmission parts of the cutting machine to ensure the smooth operation of the machine. Use proper lubricating oil and lubricate according to the instructions.
Regular inspection: regularly check whether the power cord, switch and other electrical components of the cutting machine are normal, to avoid potential safety risks such as leakage or short circuit. At the same time, check the stability of the tool fixture to ensure that it will not come loose during cutting.
To sum up, the use method of the cutting machine is simple and clear, but the maintenance points need to be frequently maintained and checked to ensure the normal operation of the machine and the cutting effect is good. Only the correct operation and maintenance, in order to maximize the efficiency of the cutting machine, extend its service life.