What are the normal daily maintenance steps of the cutting press machine?

Clean the cutter surface: First, use a soft cloth or brush to clean the cutter surface. Remove dust, debris, etc., to ensure that the machine appearance is clean and tidy.

Check the cutter: see if the cutter is damaged or blunt. If a damaged or blunt cutting knife is found, replace it in time. At the same time, check whether the fixing screw of the cutter is fastened and adjust if necessary.

Check the holder: Check the fixing screws of the holder to ensure it is fastened. If the screw is found to be loose, it should be repaired immediately. In addition, it is necessary to check the knife seat for wear or deformation, if needed for replacement.

Lubrication cutting machine: according to the instructions of the cutting machine, add a small amount of lubricating oil to the moving parts, such as chain, gear, etc., to ensure the smooth operation of the machine.

Cleaning brush machine: if the cutting machine is equipped with a brush machine, you need to clean the brush regularly. First, turn off the power supply of the cutter, remove the brush, and blow off the dust and debris accumulated on the brush with the brush or air.

Check the operating condition: turn on the power supply and observe the operation condition of the machine. Check for abnormal sound, vibration, etc. If there is any abnormality, you need timely maintenance. At the same time, it is also necessary to check whether the connections of the cutting machine are stable and tightened if necessary.

Check the belt: check the tension and wear of the belt. If the transmission belt is found to be loose or badly worn, you need to adjust or replace the transmission belt in time.

Waste cleaning: the daily use of cutting opportunities produces large amounts of waste. Clean up the waste material in time to prevent its accumulation from affecting the normal operation of the machine.

Regular maintenance: in addition to daily maintenance, it also requires regular comprehensive maintenance and maintenance. Make corresponding maintenance plan according to usage situation and manufacturer requirements, including cleaning, lubrication, inspection and replacement of vulnerable parts.