Automatic cutting machine is a modern cutting equipment, which can efficiently complete the material cutting, cutting and other work. When using the fully automatic cutting machine, sometimes the pressure will not stop, affecting the normal work of the equipment. The reasons of the automatic cutter will be detailed below, so as to better solve this problem.
1. Poor circuit connection
The automatic cutting machine is controlled by the electronic control system. If the circuit is poorly connected, it will cause the equipment to stop. For example, if the power cord or control line is poorly connected, the voltage of the device may be unstable, so that the lowering pressure will not stop. Therefore, in the case of the pressure does not stop, should carefully check whether the circuit connection is firm, contact is good.
2. Induction switch fault
The fully automatic cutting machine uses the induction switch to control the operating state of the equipment. If the induction switch is faulty or too sensitive, it may cause the device to stop. For example, if the induction switch fails or is mistakenly triggered, the device will misjudge the location of the material, so that the drop will not stop. Therefore, in the case of the pressure does not stop, carefully check the induction switch in the equipment is working normally.
Post time: May-22-2024