Clicking press cutting machine is a kind of cutting machine, in the industry is very suitable for non metal material cutting small area. Then, using the clicking press machine we should pay attention to what the problem?
1, set the swing arm cutting machine when you can put the handwheel to the set bar set to relax, to contact the control switch of the cutting point, otherwise the cutter swing arm cutting machine set the switch to ON, unable to generate the set operation.
2, when you work the swing arm cutting machine should be placed on the plate as far as possible to the central position, so as to avoid the unilateral wear cutting machine rocker, swing arm cutting machine is unilateral wear will affect the service life of the swing arm cutting machine.
3, to replace the swing arm cutting machine of the new, if the height is not the same, it should be in accordance with the cutter setting method to set the rocker arm cutting machine.
4, when you use the swing arm cutting machine for cutting action, the knife hand must first leave the rocker cutting machine or cut the board, is strictly prohibited to use your hands to support the cutter cutting, otherwise it is dangerous.
5, if the operator must leave cutting machine swing arm position, please turn off the switch of the motor, so as to avoid the improper operation of others damaged machine. It is also necessary to avoid overload to avoid damage to the machine thereby reducing the service life.
Post time: Apr-12-2022