Welcome to our websites!
News
-
Analysis of the use of hydraulic cutting machine?
Analysis of the use of hydraulic cutting machine? The characteristic of the hydraulic cutting machine is that when the cutting head is applied on the processed material through the knife mold, the pressure in the acting cylinder does not reach the rated pressure, the pressure will increase with t...Read more -
How to solve the problem of low-speed crawling caused by uneven friction of automatic cutting press machine?
Equipped with two brackets. Open the cover plate between the machine with a hexagonal shear and use anti-wear hydraulic oil. After the machine is energized, (three fire wires and one ground wire) are on, turn on the power switch and the oil pump working switch, and then immediately turn off the p...Read more -
What is the content of the four column cutting press machine?
It adopts double balance rod, double cylinder, four columns, automatic balance, automatic lubrication, automatic and full oil pressure design Simple operation, safe, power saving, strong cutting force, smooth force, convenient maintenance. The English name of the cutting machine is Cutter Maching...Read more -
How to solve the problem of the hydraulic cutting press machine?
Automatic cutting machine is also an automatic feeding cutting machine. The four-column and double-cylinder structure is adopted to realize large tonnage cutting and save energy. On the basis of the automatic cutting machine, the single or double-sided automatic feeding device is added, which imp...Read more -
What kind of material is suitable for the automatic cutting press machine
Automatic cutting machine is also an automatic feeding cutting machine. The four-column and double-cylinder structure is adopted to realize large tonnage cutting and save energy. On the basis of the automatic cutting machine, the single or double-sided automatic feeding device is added, which imp...Read more -
Safe operation process of fully automatic cutting press machine
Automatic cutting machine parts with good structure technology refers to the certain production conditions, can be easily, economic production, and easy to assemble into the machine this characteristic. Therefore, it is necessary to consider the structure technology of the parts from the producti...Read more -
How to solve the problem of low-speed crawling caused by uneven friction of fully automatic cutting machine?
For the low speed crawling caused by the uneven friction of the guide element in the hydraulic cylinder of the automatic cutting machine, it is recommended to use metal as the guide support. The coefficient should be small, for the thickness of the support ring, the size tolerance and thickness u...Read more -
How to do the column four column cutting press machine leaks oil?
Four column cutter column oil leakage is a common oil leakage problem, hydraulic oil through the column up and down the movement belt, if the column has oil and in the oil tank, did not overflow to the workbench, such a phenomenon is a normal phenomenon, does not need to deal with. If the hydraul...Read more -
Hydraulic cutting press machine manufacturer introduces the price and advantages of hydraulic cutting press machine
For the hydraulic cutting machine or some of it will be some unfamiliar, because the hydraulic cutting machine really has a lot of nicknames, such as cutting bed, press, cutting machine, die cutting machine and Hong Kong called beer machine and so on. So for hydraulic cutting machine really rusty...Read more -
Cutting press machine manufacturers teachs you the maintenance method of cutting press machine
Maintenance method of cutting press machine: 1. The hydraulic oil should be replaced for 3 months after the first use of the machine. The hydraulic oil should be replaced, and the oil filter network should be cleaned or replaced. The damage of the valve pump caused by the replacement does not bel...Read more -
What problems and treatment methods will occur in the switch of the cutting press machine
The use of the cutting machine must need to connect the power supply after the boot can, switch the machine every day, then the use frequency of the switch is also very high, such a high frequency of operation will inevitably lead to some problems due to various reasons, such as aging failure and...Read more -
Notes for automatic cutting press machine
1. When the machine stops working for more than 24 hours, relax the fixed mode of the hand wheel to avoid damage to other parts; 2. To keep enough space around to provide conditions for the placement of machinery, for the maintenance of the machine to provide enough space to check; 3. If you hear...Read more