1. Objective In order to better use the cutting machine, let the cutting machine play its due cutting function, and create more value.
2. Scope of application: hydraulic cutting machine
3. Service regulations
1. The operator of the cutting machine should conduct corresponding training, and must be trained. It is strictly prohibited to operate the equipment for the staff who do not know the equipment.
2. Wear the prescribed labor protection equipment before work to avoid accidents.
3, the inspection work before the operation is as follows: whether the button switch is sensitive, whether the travel switch is sensitive, whether the photoelectric protection device is reliable, whether the fasteners are loose, etc.
4. Remove the debris on the working table and the knife mold, adjust the cutting pressure, set the trip, and then run the empty car for one or two minutes, and the operation can be carried out after everything is normal.
5. The blocking mechanism on the machine has been adjusted appropriately when leaving the factory, and the non-debugging personnel can not be adjusted at will.
6. It is strictly prohibited to exceed the maximum pressure, and eccentric operation is strictly prohibited.
7. It is strictly prohibited to cut beyond the minimum working stroke, that is, the minimum distance from the upper workbench to the lower workbench is 50mm, and the molds and pads should be designed and placed (mold height + pad height + height of feeding plate> 50mm) according to this requirement to avoid accidents.
Post time: May-09-2024