1. When the machine stops working for more than 24 hours, relax the fixed mode of the hand wheel to avoid damage to other parts;
2. To keep enough space around to provide conditions for the placement of machinery, for the maintenance of the machine to provide enough space to check;
3. If you hear abnormal sound when boot, need to stop the power supply immediately;
4. Please keep in touch with the professional master at any time and report the specific situation of the cutting machine to the technical personnel.
5. In order to avoid the danger of electric shock in the cutting machine, the grounding terminal must be reliably grounded, pay attention to the hand should be kept dry, and the relevant professionals need to operate;
Six, before pressing the machine, the press plate should completely cover the knife mold, prohibit the staff to approach the transverse pressure domain of the machine, please close the motor when leaving the machine;
Seven, the hydraulic oil in the oil tank needs to be replaced once after one quarter of use, especially the first oil of the new machine needs to be paid great attention to. The new machine installation or oil change after about 1 month of use, must clean the oil net. And the replacement of the hydraulic oil must be thoroughly clean up the oil tank;
Eight. When the machinery starts to work, the problem of oil must be controlled within a certain range before manipulation. If the temperature of oil is too low, it is necessary to let the oil pump work to continue to a certain period of time, and the oil temperature reaches 10℃ (50? F), the oil pump can display its efficiency;
Nine, do not make any wiring terminal nut loosen, otherwise it may be the motor and electrical wiring contact is poor, and lack of phase operation, leading to burning and material damage may be possible
Post time: Jun-16-2024