As the most widely used cutting machine, the precision four-column cutting press machine needs to be effectively maintained during its use. Today, we will understand the maintenance focus of the precision four-pillar cutting machine.
1. Run for 3~5 minutes for heating machine, especially when the temperature is relatively low; then after the heating machine.
2. Clean and maintain the precision four-column cutting machine once before leaving work every day, and disconnect the power supply.
3. It is necessary to check the screw locking degree of electrical components every week and lock them in time.
4. After the new machine is replaced with the hydraulic oil for 6 months, the hydraulic oil is replaced once a year.
5. Check whether the lubrication pipeline, oil pipeline and joints are loose.
6. When removing the hydraulic components, first set the upper workbench to the lowest point, and then slowly remove the joints or screws, until the hydraulic oil in the pipeline and hydraulic components is completely unloaded.
Only pay attention to the above six points of maintenance focus, precision four-column cutting machine can better bring profits for you.
Post time: Jun-11-2024