As the most widely used cutting machine, the precision four-column cutting machine needs to be effectively maintained during its use. Today, we will understand the maintenance focus of the precision four-pillar cutting machine.
1. Run for 3~5 minutes for heating machine, especially when the temperature is relatively low; then after the heating machine.
2. Clean and maintain the precision four-column cutting machine once before leaving work every day, and disconnect the power supply.
3. It is necessary to check the screw locking degree of electrical components every week and lock them in time.
4. After the new machine replaces the hydraulic oil for 6 months, replace the hydraulic oil once a year.
5. Check whether the lubrication pipeline, oil pipeline and joints are loose.
6. When removing the hydraulic components, first set the upper workbench to the lowest point, and then slowly remove the joints or screws, until the hydraulic oil in the pipeline and hydraulic components is completely unloaded.
Post time: May-31-2024