For the hydraulic cutting machine or some of it will be some unfamiliar, because the hydraulic cutting machine really has a lot of nicknames, such as cutting bed, press, cutting machine, die cutting machine and Hong Kong called beer machine and so on. So for hydraulic cutting machine really rusty very much, but it is the cutting machine, mainly use of molding knife mold, through cutting machine stamping strength processing will sheet or coil light industrial materials cut into finished or semi-finished products, this is its efficacy and name, so these are not our theme, the theme is the hydraulic cutting machine manufacturers introduce hydraulic cutting machine price and advantage, hope to help to the need to purchase cutting punch manufacturers.
Hydraulic cutting machine price is very transparent, is based on different tonnage and different table size, such as 30 tons-300 tons price is a ton of a ladder, but the range is not too big, if it is manual hydraulic cutting machine price will be between tens of thousands to tens of thousands, but if it is semi-automatic hydraulic cutting machine price is relatively expensive, is ten thousand started, after all, the modern era of automation, of course manual hydraulic cutting machine is also very useful, is the need to consume labor. So what are the advantages and defects of the manual and semi-automatic hydraulic cutting machine? Relatively manual hydraulic cutting machine function is easy to operate, and the price range will be lower, basically so light industrial manufacturers can bear and the scope of investment, but semi-automatic hydraulic cutting machine is not different, the advantage lies in the semi-automatic, automatic feed feeding, fast and simple, is ordinary manual hydraulic cutting machine 3 times, so on the price is relatively expensive than manual hydraulic cutting opportunities.
Operating specification for the hydraulic cutting machine
1. When setting the cutter of the hydraulic cutting machine, we must relax the set hand wheel first, so that the setting rod touches the cutting point control switch, otherwise, when the cutter setting switch is transferred to ON, the set action cannot be generated (manual hydraulic cutting machine setting operation procedures).
2. When the hydraulic cutting machine works, put the cutter in the central position of the upper pressure plate as far as possible to avoid the imbalance between the left and right sides of the cutting machine.
3, the replacement of the new knife is different height, can detect the level of the machine is in place.
4, in the operation of the hydraulic cutting machine, the hands are prohibited in the working table, to avoid industrial injury.
5. If the operator needs to temporarily leave the position, please turn off the motor switch.
6, please avoid whether manual or semi-automatic hydraulic cutting machine overload use to avoid damage to the machine and reduce the service life.
Post time: Jun-24-2024