Four column cutter column oil leakage is a common oil leakage problem, hydraulic oil through the column up and down the movement belt, if the column has oil and in the oil tank, did not overflow to the workbench, such a phenomenon is a normal phenomenon, does not need to deal with. If the hydraulic oil overflows on the workbench and pollutes the product, there is no need to worry about such a problem, which is a very common small problem. We first find a thin wire, and then poke the oil hole on the guide, and then blow the waste away with an air gun. This brings the hydraulic oil back into the machine and does not spill out onto the workbench.
In summary, the four-column cutter column oil leakage is a normal phenomenon, as long as it does not overflow to the workbench can not be dealt with. If it overflows on the workbench, this is the oil return hole is blocked, and the waste debris needs to return the oil in the oil hole, to ensure the normal oil return in the oil return hole. In case of machine problems, it is suggested to contact the cutting machine manufacturer at the first time. The cutting machine manufacturer will help you to deal with the problem. Do not casually disassemble the cutting machine for their own maintenance, to prevent causing unnecessary trouble, thank you!
Post time: Jun-25-2024