Equipment shall be placed on a flat concrete floor and check that all parts are in place and all lines are open. For the matters needed to pay attention to when cleaning the equipment, avoid the sundries on the equipment. When injecting hydraulic oil, we need to continue after the installation of related equipment development, and the oil surface needs to be kept at the top of the oil filter screen. When connecting the power supply, you needs to be able to press the start button on the device, roughly adjusting the steering motor, so the steering needs to be the same as the steering arrow.
Cause of uneven pressure distribution of automatic feeding cutter:
1. Long-term overpressure use. It can also cause insufficient pressure on the cutter.
2. Large benches use knife molds for a long time and deviate off the center.
3. After the front and rear punching knife or about long-term local use, can be fixed for a long time.
4. The oil pump is the power problem of the whole cutting machine. If the oil pump seriously damages the enterprise or the oil leakage, it will lead to insufficient pressure management of the oil pressure cutter.
Scope and status of automatic cutting machine:
Automatic cutting machine is suitable for foaming materials, cardboard, textile, plastic materials, leather, rubber, packaging materials, floor materials, carpet, glass fiber, cork and other non-metallic materials.
The cutting equipment with high degree of automation are: computer-controlled mobile cutting machine, laser cutting machine (swing cutting machine), high pressure water beam cutting machine and computer cutting machine. The device’s cutting table is equipped with vibrating cutting tools and visual observation devices, used for leather contour scanning, or for casting shadows on the leather to guide the cutter to arrange the drop material pattern on the leather.
Post time: Mar-19-2024